North: 0151 924 6344
Scotland: 0131 526 4557
Midlands: 0121 296 9840
South: 0203 752 2896
Email: sales@ecs-sunbeds.com
Scotland: 0131 526 4557
Midlands: 0121 296 9840
South: 0203 752 2896
Email: sales@ecs-sunbeds.com
If you run a Hair, Beauty or Tanning Salon, Gym, Hotel, or Wellness Centre anywhere in the UK, you already know how critical uptime and performance are when it comes to your sunbeds. Clients expect consistent, reliable tanning results. Weak tubes, a cracked acrylic, or a minor electrical fault can result in downtime, unhappy customers, and lost revenue.
That’s where professional sunbed retubing and servicing come in — and as the UK’s largest sunbed company, ECS Sunbeds is your go-to partner for keeping your tanning equipment operating at its best across the whole of the UK.
Sunbed tubes (lamps) are consumable components. With use, their UV output gradually diminishes—even if they still light up. That means longer session times, uneven tanning, or dissatisfied clients. Many salons operate under the assumption that tubes should be replaced after a certain number of hours (for example, 500~800 hours is often cited).
By retubing with fresh, high-performance lamps, you restore strong, even UV output and proper tanning performance.
Older tubes, especially as they age, draw more current or become inefficient in maintaining output. Replacing them can reduce the electrical strain on your system, help prevent overheating, and lower energy usage overall.
A regular service schedule helps catch minor faults—faulty wiring, worn lamp holders, weak fans or ventilation, loose connections—before they become full breakdowns. That means fewer emergency calls, lower repair costs, and uninterrupted service to your customers.
UK and European standards for UV equipment impose limits on UV output, safety interlocks, and maintenance regimes. Regular servicing ensures your beds remain compliant, safe, and insurable.
Sunbeds are capital equipment. They’re a significant investment, and regular care helps extend their operational life, reduce degradation, and preserve resale or refurbishment value later.
When you book a service or retubing visit with a specialist (such as ECS Sunbeds), here’s a rundown of what typically happens. The better the provider, the more thorough the work:
By combining retubing with servicing, you get a “one-stop” maintenance call, maximising value and minimising disruption.
ECS Sunbeds covers the whole of the UK — England, Scotland, Wales — from major cities to remote towns. Whether you’re in London, Glasgow, Cardiff, Manchester, Aberdeen, or a more rural area, ECS can send an engineer.
They maintain regional teams and strategic logistics to ensure prompt response largest sunbed company & supplier
As the UK’s largest sunbed company, ECS Sunbeds scales, inventory, and consistency. Their size allows them to stock a broad range of lamps, acrylics, parts, and tools — meaning their engineers often carry the right parts on the first visit.
Unique offers & “extras”
All of this package differentiates ECS from many smaller operators or “one-man” engineers, providing you with a more assured, full-service approach.
ECS Sunbeds is not just a servicing company — they also sell, rent, refurbish and maintain sunbeds, lamps, acrylics, parts, and consumables. That breadth means they understand the full tanning lifecycle and are deeply embedded in the industry.
Their status as the largest lamp distributor in the UK is further confirmation of their scale and market position.
When selecting replacement lamps, ECS Sunbeds leans heavily on American Leisure for several reasons:
That said, ECS remains flexible — if you prefer a different lamp brand, they’re happy to install it, provided it’s compatible.
The acrylic sheet (the “lid” and “bed” surface) is more than cosmetic — it’s critical for safe, even tanning, and ensures client comfort. Over time, acrylics can suffer:
When acrylics are no longer in acceptable condition, they must be replaced. ECS stocks acrylics for virtually all sunbed makes and models and can install them during the same service or retube call.
To complement ECS’s expert servicing, here are the best practices your staff or management should follow:
Regular cleaning and sanitisation
After each tanning session, clean the acrylics and bed surfaces using only approved sunbed sanitisers (not harsh chemicals). A clean bed is more hygienic and reduces abrasion and wear.
Ventilation & ambient temperature control
Ensure rooms are well ventilated and do not allow extreme overheating, which can stress electronics and acrylics.
Monitor lamp hours
Keep a close eye on the total hours run per bed. Swap or retube before performance noticeably declines.
Staff training & gentle handling
Train staff to open/close lids carefully (avoid slamming), avoid standing on beds, and prevent undue stress on hydraulic parts. Mistreatment accelerates wear on hinges, gas springs, and acrylics.
Routine visual checks
Weekly inspections for signs of cracked acrylic, flickering lamps, weaker UV output, or odd noises. Catching issues early reduces repair complexity.
Keep spare parts in stock
Maintain a small stock of lamp holders, starters, fuses, connectors, so small issues can be remedied swiftly.
Schedule regular servicing
Don’t wait for failure. Plan a maintenance/retubing call (via ECS) every 6–12 months (or sooner depending on usage).
When you contact ECS Sunbeds to arrange retubing or servicing:
Engineers will typically arrive with a parts kit, new tubes, and the tools to perform the full job in one visit. You’ll get a service report and next-due service date.
ECS’s Sunbed Care Plan is also an attractive option for salons with multiple beds.
Sunbeds represent a major investment for your business. Ensuring they are maintained, retubed, and serviced properly is essential not just for customer satisfaction but for safety, energy efficiency, and longevity of your equipment.
By choosing ECS Sunbeds — the UK’s largest and most trusted commercial sunbed company — you gain a partner who can service your beds anywhere in the UK, carry appropriate stocks of lamps and parts, remove old lamps for free, handle minor repairs on the same visit, and supply or fit new acrylics. Their preference for American Leisure lamps ensures quality and consistency, and their scale gives them logistical advantages few can match.
If you’d like, I can format this into a ready-to-publish blog post (with images, alt tags, internal links, etc.), or even provide a shorter “landing page” version. Do you want me to put this into that format for ECS Sunbeds?
